D115
MANUAL SUCTION SANDBLASTING CABINET
- Work screen in 3 pieces, maximum load 150 kg
- Gun-holder adjustable, secured on left wall
- Sandblasting switch pneumatic foot pedal
- Loading door unhingeable single-piece wing-type door with lever closing system assembled on each side of cabinet allowing a passage of 660 x h 630
- Window without blind spot including 1 tilting frame securing 1 safety glass window, thickness 4 mm, fitted in a sealed rubber profile and 1 inside wear glass, thickness 4 mm, clamped on the frame
- Lighting 1 waterproof metallic bowl with 2 fluorescent 18 W tubes, dust-free ceiling light protected by wear glass
- Electric board waterproof box in the left front foot of cabinet with protection against overloading and short-circuits + 30 mA differential protection
- Light switch on cabin front panel, in the right front foot of cabinet
- Security switch 1 pneumatic sensor on top of each door immediately stops sandblasting when one of the 2 doors of cabinet opens
- Pressure control valve fitted in the shelter of the left front foot of cabinet ; adjustable from 0 to 10 bar
- Arm access double abrasion-resistant rubber holes
Exterior dimensions | |
Width | 1100 mm |
Depth | 900 mm |
Height | 1700 mm |
Interior dimensions (working volume) | |
Width | 1000 mm |
Depth | 650 mm |
Height | 650 mm |
Weight | 130 kg |
Compressed air connection | 1″ gas |
Gun | |
Operating | suction system |
Sandblasting nozzle | Ø 6 ou 8 mm |
Air nozzle | Ø 2 ou 3 mm |
Airflow | from 13 m3/h to 30 m3/h at 7 bars |